Same-day service across the GTA

Open 7 days a week
8:00 am - 8:00 pm

(416)417-1799

24/7 Emergency Service

RICHMOND HILL FURNACE REPAIR

Best Furnace Repair Services in Richmond Hill, ON

Northfield Mechanical repairs gas furnaces across Richmond Hill seven days a week from 8:00 am to 8:00 pm, with a free diagnostic when it leads to a repair.

Richmond Hill sits between our Newmarket sales office and our Woodbridge showroom and warehouse, so it is covered from both ends and usually gets a same day slot.

Call 416 417 1799 or book furnace repair online.

Professional furnace repair technician servicing a gas furnace in Richmond Hill Ontario
LOCAL FURNACE SERVICE

Why Response Times Are Good Here

Response times here come down to geography. Our sales office is at 190 Beechwood Crescent in Newmarket, a short run up Yonge Street, and our showroom and warehouse is at 910 Rowntree Dairy Road in Woodbridge to the southwest.

Richmond Hill sits between them. The vans pass through the area on the way to almost everything else, which is why a call here often gets picked up the same day even in the middle of a cold snap.

Convenient Local Coverage

Sales Office:
190 Beechwood Cres
Newmarket, ON L3Y 1W3

Showroom & Warehouse:
910 Rowntree Dairy Rd, Unit 30
Woodbridge, ON L4L 5W6

Phone:
416 417 1799

Service Hours:
Seven days a week
8:00 am to 8:00 pm

Request Furnace Service →

Common Furnace Problems in Richmond Hill Homes

The area is a mix of established neighbourhoods around Yonge and newer subdivisions toward Oak Ridges and Jefferson. Different homes bring different furnace faults.

01

Blocked Condensate Traps

High efficiency condensing furnaces can stop working when condensate traps become blocked.

02

Pressure Switch Errors

Pressure switch faults can interrupt the heating cycle and require professional diagnosis.

03

Iced Intake Terminations

Intake terminations can ice over after freezing rain, affecting the operation of condensing furnaces.

04

Control Board Failures

Control boards reaching the end of their service life can cause furnace faults.

05

Ignition and Blower Problems

Older furnaces often experience dirty flame sensors, failed igniters, blower motors and capacitor problems.

06

Cracked Heat Exchangers

Some older furnaces develop cracked heat exchangers, which require immediate professional attention because of safety risks.

How the Visit Works

Our technicians diagnose the problem, explain the findings and provide clear pricing before any furnace components are replaced.

01

Diagnose the Fault

The technician inspects the furnace and identifies the cause of the heating problem.

02

Explain the Repair

You receive an explanation of the fault and the repair price before any work begins.

03

Complete the Work

Nothing is replaced before you agree. The diagnostic costs nothing when it leads to a repair with us.

Professional service and warranties: All work is done by TSSA certified technicians. Repairs carry a two year warranty and installations a 10 year warranty on manufacturer parts, with two years on labour. If replacement is the better choice, we explain why without recommending a furnace that is not needed.

What an Annual Service Covers

A maintenance visit is not a quick look. Our technicians inspect and test the important components that keep your furnace operating safely and reliably.

01. Burner Inspection

Burners are cleaned and inspected as part of the maintenance visit.

02. Flame Sensor Service

The flame sensor is serviced to help maintain reliable furnace ignition.

03. Heat Exchanger Inspection

The heat exchanger is inspected for signs of deterioration and potential safety concerns.

04. Gas Pressure and Temperature

Gas pressure and temperature rise are measured against manufacturer specifications.

05. Airflow and Filter Assessment

Airflow and the furnace filter are assessed for restrictions affecting heating performance.

06. Safety Control Testing

Every safety control is tested as part of the furnace inspection.

07. Thermostat Calibration

The thermostat is checked for calibration and correct operation.

08. Condensate System Service

The condensate system is cleared on high efficiency furnaces.

Clear maintenance findings: You are told what was found rather than simply that the furnace passed, including anything that is wearing but has not failed yet. This helps you plan a repair instead of reacting to an unexpected breakdown.

When to Call Rather Than Wait

Your furnace often gives warning signs before a complete breakdown. Having these symptoms inspected early can help prevent more expensive repairs.

01

Frequent Short Cycling

A furnace cycling on and off every few minutes can indicate an underlying heating problem.

02

Unusual Furnace Noises

A new or unfamiliar noise can signal a component beginning to fail.

03

Cooler Air Than Normal

Air that feels cooler than it used to may indicate reduced heating performance.

04

Repeated Breaker Trips

A furnace repeatedly tripping a breaker needs professional inspection. Stop resetting the breaker.

05

Unexpected Gas Bill Increase

A sudden jump in your gas bill without a change in weather can indicate a heating efficiency problem.

06

Repeated Furnace Shutdowns

If the furnace keeps shutting itself down, stop resetting it and contact a qualified technician.

Do not wait for a breakdown: The same fault is often cheaper to deal with in October than in January. If your furnace repeatedly shuts down or a breaker keeps tripping, stop resetting it and call.
Please enter your phone number so that our experts can contact you as soon as possible.

contact experts